I applied a couple of coats.
A little later, I removed the masking tape and took a look.
Well, that looks pretty terrible. The paint somehow managed to leak underneath the masking tape in some areas. I used rubbing compound to see if I could remove the excess aluminum paint.
Amazingly, this worked. I think this is acceptable.
The end is near.
2 comments:
Great job victor! I'm amazed you saved the booster covered based on that photo! I personally hate the blue painters tape and use the green Frog Tape, it seems to really seal the seams better.
Thanks Johnathan. Lesson learned, I will definitely try the Frog tape if and when I need to do a job like this again.
-Victor
Post a Comment