I'm using GE Silicone II White Paintable Silicone to fill in the gaps. This is the same stuff that I used on the skirt on droid #1.
I just ran a bead in the gap as needed.
A razor blade cleans up the excess.
Hopefully that'll do it. I'll probably apply a mist coat of primer soon to see where any additional filling or sanding is required.
2 comments:
Victor,
Why not just use evercoat to fill them?
Good question Jamie. I considered using Evercoat, but in this case I had to do some sculpting and filling in the deep crevices, so I decided to go with the silicone. Once I use primer to see how everything looks, I might go back with Evercoat and smooth any needed areas out.
Incidentally, I did use Evercoat earlier along the curved part of the wooden base, and to smooth up the area where the box of the skirt meets up with the base.
-Victor
Post a Comment