Sanded Ankle Details and Resin Eye

Time to sand down last night's handiwork.

Starting with the ankle details and some 400 grit sand paper.



A minute face down on the 400 grit sand paper gets rid of most of the Evercoat.



And another few seconds with 600 grit sand paper gets the surface even smoother.



Repeat three more times, and hope that this does the trick.



Moving on to the resin eye, there are a few spots of Evercoat to sand down.



Again, I used 400 grit sand paper to start, followed by 600 grit.



When I get a moment, I'll clean these up and spray a light coat of primer to see if they are ready for the full primer and paint job. I sure hope so.