Wednesday, January 19, 2011

Ankle Cylinder Work, Evercoat Work on Eye

Time to spray some primer on the ankle cylinders, to see if they need any further finishing work.

Well, they need just a little bit of work. Very little.

I sanded the primer from the areas to be filled, and filled the divots with Evercoat.

And after the Evercoat had dried, I sanded the surface smooth. I also sanded the Evercoat on the resin eye, and scraped some gunk out of the slot in the ankle details.

Another test coat of primer tomorrow, and hopefully I can move on to final primer and painting.

No comments: