Wednesday, July 14, 2010

Evercoat Touch-Up for First Outer Foot Shell

There are a couple of small discontinuities at the bottom of the curve of the first outer foot shell, that won't be concealed by the battery box. I decided to take care of those tonight.

I applied a thin layer of Evercoat to the two spots that needed work.

Followed by sanding after the Evercoat had hardened.

Hopefully I'm done with filling and sanding for this foot shell. I'll apply some more primer to verify that this one is done. If so, I get to do it all over again with outer foot shell #2.

No comments: