More Rear Logic Work

Tonight I started work on getting the rear logics mounted. First, I drilled the perf board so that I could mount the PIC flasher circuit to it, using nylon screws, nuts and standoffs.



Next, I cut a couple of pieces of flat metal bar, drilled a hole in one end of each of them to screw them down to the dome ring, and bent them so that they will rest flat on the dome ring. I will screw the perf board onto the bars.

I still need to bend and cut the bars down a bit more, and drill the perf board such that the LEDs will be centered in the dome hole for the rear logics, when mounted to the bars.