Sunday, August 28, 2005

Drilled Wire Holes, Started Gluing Right Leg Main Layers

I drilled holes out of the shoulder discs and inner-most shoulder area of the right leg to facilitate the electrical wires that will run from inside R2's body, down to the motors in the feet. I also began gluing the two outboard main leg layers on the right leg. Made a stop at Home Depot to pick up some more sand paper, DAP Plastic Wood, and an extra 5/16"x2" bolt to replace one of the existing bolts whose threads didn't seem to be quite right. Not picture-worthy (again).

No comments: