Wednesday, October 06, 2010

Finished Gluing PSI Holders

Tonight I spent a few minutes finishing up my PSI holders.

First, I marked where the metal PSI housing should sit on the uprights.



Next, I sanded the areas of contact, to help give the PVC glue a rough surface to grab onto.



Then I brushed a little PVC glue at the top of each upright.



Finally, I placed the housing onto the uprights, aligning with the marks I made earlier.



And then I repeated the process for the other PSI.



Of course, I still need to assemble the PSI electronics, but at least they'll have a place to live once I'm done.

No comments: